Cart

Quick Links

GM 3 Bar MAP Sensor
Product

MAP – GM 3 Bar MAP Sensor

SKU: GM3bar-map

$67.00

Standard GM style 3-bar MAP Sensor (Manifold Absolute Pressure Sensor), compatible with the MS3-Pro and all flavors of the MegaSquirt EMS / MicroSquirt EMS.  Assembled in the USA, unlike the current Delphi production. Calibration is linear with 1.1 kPa at 0 volts and 315.5 kPa at 5 volts. The wiring harness connector is sold separately as…

View Details Add to cart

MAP - GM 3 Bar MAP Sensor 6" Pigtail
Product

MAP – GM 3 Bar MAP Sensor 6″ Pigtail

SKU: GM3bar_piggy

$12.49

Compatible with standard keying of GM’s 3-Bar Map Sensor.  This plug features 6″ of pigtail and is ready to be added to your wiring harness. Color coding when used with our 3 bar MAP sensor is as follows: Black – Sensor Ground Green – Signal to ECU Gray – 5 volt reference voltage from ECU

View Details Add to cart

GM Closed Element CLT/IAT Sensor with Pigtail
Product

GM Closed Element CLT/IAT Sensor with Pigtail

SKU: CLTIATwPiggy

$18.99

GM Closed Element CLT/IAT Sensor with Pigtail Suitable for use as a Coolant Temperature Sensor (CLT) on all vehicles, or as an Intake Air Temp Sensor (IAT) on naturally aspirated vehicles. These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and include a 6″ wire pig-tail with weatherproof connector. The…

View Details Add to cart

Product

150psiG Pressure Sensor Methanol e85 1/8″NPT

SKU: PS-0150

$110.00

AMP EFI 150psiG Pressure Sensors are shock resistant, made from 304 stainless steel and designed for more than 100 million cycles.  0-150psiG pressure sensors respond in a milisecond and are commonly used to monitor fuel, coolant and oil pressure.  AMP EFI’s 150psiG pressure sensors, sometimes referred to as pressure transducers, are IP67 rated and built…

View Details Read more

Product

1500psiG Pressure Sensor Nitrous Pressure

SKU: PS-01500

$110.00

AMP EFI 1500psiG Pressure Sensors are shock resistant, made from 304 stainless steel and designed for more than 100 million cycles.  0-1500psiG pressure sensors respond in a milisecond and are commonly used to monitor nitrous pressure.  AMP EFI’s 1500psiG pressure sensors, sometimes referred to as pressure transducers, are IP67 rated and built to withstand a…

View Details Read more

MegaSquirtPNP G2 TS9395 for the 93-95 Toyota MR2 - Celica 3SGTE
Product

MSPNP2 – 93-95 Toyota MR2 – Celica 3SGTE

SKU: MSPNP2-TS9395

MSPNP2 Plug and Play Standalone Engine Management System Fits the following USDM cars with the 3S-GTE engine: 1992-1993 Toyota Celica All-Trac (GT-Four) with manual transmission 1993-1995 Toyota MR2 Turbo with manual transmission See the ECU part number listing at the end of this entry to check if a Toyota ECU not sold in the United…

View Details Read more

Product

Innovate Motorsports DL32 Datalogger and Sensor Controller – 378

SKU: dl-32-3782

$499.00

DL32 Datalogger and Sensor Controller The DL-32 is a complete vehicle-mounted data-logging system for advanced engine tuning. The system is anchored by Innovate’s award-winning digital wideband air/fuel ratio technology, but also includes flexible sensors for RPM, MAP, temperature, duty cycle, and analog inputs. 32 channels of data recording 5 internal channels 17 Minutes of recording…

View Details Add to cart

GM Closed Element CLT/IAT Sensor with Connector
Product

GM Closed Element CLT/IAT Sensor with Connector

SKU: CLTIATwConn

$17.00

These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and come with the weatherproof connector and crimp pins.  Suitable for use as a coolant temperature or oil temperature sensor, and is occasionally used as an air temperature sensor in certain applications where a fast acting open element sensor may become…

View Details Add to cart

GM Open Element IAT Sensor with Pigtail
Product

GM Open Element IAT Sensor with Pigtail

SKU: IATwPiggy

$22.49

GM Open Element IAT Sensor with Pigtail Recommended ‘Fast-Response’ Intake Air Temp Sensor (IAT) for use on forced induction vehicles. These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and include a 6″ wire pig-tail with weatherproof connector. The threads are 3/8″ NPT pipe thread – note that isn’t an…

View Details Add to cart

MegaSquirtPNP G2 TS9092 for the 90-92 Toyota MR2 - Celica 3SGTE
Product

MSPNP2 – 90-92 Toyota MR2 – Celica 3SGTE

SKU: MSPNP2-TS9092

Due to high demand, this ECU is currently in production and will begin shipping May 15th in the order received. ORDER TODAY and receive $80 in store credit once yours is received!  [LIMIT 5; Promotion ends on May 15th @ MIDNIGHT EST]

View Details Read more