Cart

Quick Links

MS3Pro

EPA, CARB, Race Use Only Disclaimer
MS3Pro Engine Management Systems are coming out on top time after time and event after event. Whether you’re running down the drag strip, the road course, the salt flats or whatever your racing venue of choice, the MS3Pro will give you essentially unlimited control of your naturally aspirated or forced induction (turbo/supercharged/nitrous) engine with a list of race focused features that will get you down the track with excellence, all in a single lightweight, water and weather resistant enclosure. The advanced TunerStudio software provides an intuitive, straight-forward tuning experience for pros and enthusiasts alike with best in class self-learning capabilities to assist you if you’d like. Experience for yourself why more and more racers and performance enthusiasts are recognizing and choosing MS3Pro over the competition.

Showing 1–16 of 27 results

  • AXM-100 High Voltage Tach Adapter

    $65.00

    Many older tachometers trigger off the negative terminal of the ignition coil.  Often, these use a filtering circuit which will not trigger when given a 0 to 12 volt square wave signal, such as the tach output signal from an ECU or ignition box. If you h...

    Add to cart
  • Sealed resistor – 10K

    $4.50

    We've wrapped a 10K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Red heat shrink tubing with yellow leads. Typically used as a shunt resistor with VR sensors.

    Add to cart
  • Sealed resistor – 1K

    $4.50

    We've wrapped a 1K, 1/4 watt resistor in a sealed and strain-relieved package for underhood use. Blue heat shrink tubing with blue leads. Suggested uses include a pull-up resistor for Hall effect and optical sensors, and pull ups for VSS or other 0-12 vol...

    Add to cart
  • MS3Pro ULTIMATE Standalone EMS – ECU Only

    From: $1,349.00

    Experience the MS3Pro ULTIMATE by AMP EFI, featured in Street Outlaws No Prep Kings contestant, The Hulk. MS3Pro ULTIMATE by AMP EFI brings NEXT LEVEL capability to MS3Pro's staggering feature set beginning with a new high quality aluminum IP65 rated, ...

    Add to cart
  • MS3Pro EVO Standalone Engine Management System – ECU Only

    From: $1,099.00

    Introducing MS3Pro EVO. (supersedes 1st Gen MS3Pro) MS3Pro EVO is an evolution, not a revolution- a scaled up, more capable MS3Pro due to shared technology with big brother, MS3Pro Ultimate.  EVO does not have peak and hold injector drivers, but it d...

    Add to cart
  • MS3Pro Ultimate Standalone Engine Management System w/ Harness

    $1,499.00

    Experience The ULTIMATE. Developed from the MS3Pro 1st Gen platform, the Ultimate brings NEXT LEVEL capability to MS3Pro's staggering feature set beginning with a new high quality aluminum IP65 rated, water resistant enclosure.  The Ultimate provides ...

    Add to cart
  • MS3Pro EVO Standalone Engine Management System w/ Harness

    $1,249.00

    Introducing MS3Pro EVO Standalone Engine Management System (supersedes 1st Gen MS3Pro) MS3Pro EVO Standalone Engine Management System is an evolution, not a revolution- a scaled up, more capable MS3Pro due to shared technology with big brother, MS3Pro...

    Add to cart
  • MS3Pro Standalone ECU Only

    $1,049.00

    IMPORTANT PRODUCT UPDATE** MS3Pro-ECUPKG has been discontinued and superseded by MS3Pro EVO effective May 1, 2017.  This product page, including documentation, downloads & product FAQ tabs below, remains active for archive purposes.   Compare M...

    Read more
  • MS3Pro Standalone ECU with 8′ Wiring Harness

    5 out of 5
    $1,199.00

    IMPORTANT PRODUCT UPDATE**  MS3Pro-Pkg1 has been discontinued and superseded by MS3Pro EVO effective May 1, 2017.  This product page, including documentation, downloads & product FAQ tabs below, remains active for archive purposes.   Compare MS...

    Read more
  • MS3Pro ULTIMATE Wiring Harness – Universal Flying Lead

    $299.00

    MS3Pro ULTIMATE Complete 8' Flying Lead Harness Only (White-Black-Gray connectors with 8' pigtails) arrives with color-coded, printed wires per the pinout below. All applications.

    Add to cart
  • MS3Pro ULTIMATE – Center (Black) Harness Only

    $49.00

    MS3Pro ULTIMATE adds nearly 50% more I/O with the addition of a third AMPSEAL 23-pin, 8' flying lead.  Harness arrives with color-coded, printed wires per the pinout below (black center connector) ***Center Harness ONLY in this listing, intended for p...

    Add to cart
  • MS3Pro EVO Wiring Harness – Universal Flying Lead

    $249.00

    MS3Pro EVO Complete 8' Flying Lead Harness Only (White & Gray connectors with 8' pigtails) arrives with color-coded, printed wires per the pinout below. All applications.

    Add to cart
  • AMPEFI Transmission Controller with 4L80E Subharness

    $499.00

    4L80E Plug and Play Transmission Control  Seamlessly control your 4L80E transmission with AMPEFI Transmission Control! The supplied 4L80E subharness provides a simple, plug and play integration with MS3Pro and directly mates with our LSx drop on ha...

    Add to cart
  • AMPEFI Transmission Controller with 4L60E Subharness

    $499.00

    AMPEFI 4L60E Plug and Play Transmission Control Seamlessly control your 4L60E transmission with AMPEFI Transmission Control! The supplied 4L60E subharness provides a simple, plug and play integration with MS3Pro and directly mates with our LSx drop ...

    Add to cart
  • 4 Pin M12 Serial Cable

    $29.99

    Optional, connect MS3Pro ULTIMATE directly to your laptop with this 4 pin M12 serial cable.

    Add to cart
  • MS3Pro 1st Gen Wiring Harness Upgrade (for ULTIMATE & EVO)

    $22.00

    If you have a previously installed MS3Pro harness (1st Gen) and want to change to an MS3Pro ULTIMATE or EVO ECU, the upgrade path is simple.  However, complete functionality will require a few basic changes to your 1st Gen harness. Our wiring upgrade ki...

    Add to cart