Your cart is currently empty.
Shop by Category
Featured Products
-
MS3Pro 1984-1987 Buick Grand National Plug and Play
$1,429.00MS3Pro 1984-1987 Buick Grand National Plug and Play (P/N: MSPNPPro-GNX8487) Fits 1984-1987 Buick Regal with the 3.8 Turbo V6, including Grand National, T-Type, and GNX. MS3Pro 1984-1987 Buick Grand National Plug and Play Model Features: Fully Plug...
View Details Add to cart -
MS3Pro ULTIMATE Standalone ECU Only
From: $1,349.00Experience The ULTIMATE. Developed from the MS3Pro 1st Gen platform, the Ultimate brings NEXT LEVEL capability to MS3Pro's staggering feature set beginning with a new high quality aluminum IP65 rated, water resistant enclosure. The Ultimate provide...
View Details Add to cart -
MS3Pro EVO Standalone ECU Only
From: $1,099.00Introducing MS3Pro EVO. (supersedes 1st Gen MS3Pro) MS3Pro EVO is an evolution, not a revolution- a scaled up, more capable MS3Pro due to shared technology with big brother, MS3Pro Ultimate. EVO does not have peak and hold injector drivers, but it d...
View Details Add to cart -
MS3Pro ULTIMATE Standalone Engine Management System
$1,499.00Experience The ULTIMATE. Developed from the MS3Pro 1st Gen platform, the Ultimate brings NEXT LEVEL capability to MS3Pro's staggering feature set beginning with a new high quality aluminum IP65 rated, water resistant enclosure. The Ultimate provide...
View Details Add to cart -
MS3Pro EVO Standalone Engine Management System
$1,249.00Introducing MS3Pro EVO Standalone Engine Management System (supersedes 1st Gen MS3Pro) MS3Pro EVO Standalone Engine Management System is an evolution, not a revolution- a scaled up, more capable MS3Pro due to shared technology with big brother, MS3Pro...
View Details Add to cart -
MS3Pro Standalone ECU with 8′ Wiring Harness
$1,199.00IMPORTANT PRODUCT UPDATE** MS3Pro-Pkg1 has been discontinued and superseded by MS3Pro EVO effective May 1, 2017. This product page, including documentation, downloads & product FAQ tabs below, remains active for archive purposes. Compare MS...
View Details Read more -
MS3Pro ‘Drop On’ 24x LS Plug and Play Harness w/ ECU – 1st Gen
$1,699.00IMPORTANT PRODUCT UPDATE** MS3Pro (1st Gen) has been discontinued and superseded by MS3Pro EVO effective May 1, 2017. This product page, including documentation, downloads & product FAQ tabs below, remains active for archive purposes. Compare...
View Details Read more -
MS3Pro ‘Drop On’ 58x LS Plug and Play Harness w/ ECU – 1st Gen
$1,699.00IMPORTANT PRODUCT UPDATE** MS3Pro (1st Gen) has been discontinued and superseded by MS3Pro EVO effective May 1, 2017. This product page, including documentation, downloads & product FAQ tabs below, remains active for archive purposes. Compare...
View Details Read more -
AMPEFI Transmission Controller with 4L60E Subharness
$499.00AMPEFI 4L60E Plug and Play Transmission Control Seamlessly control your 4L60E transmission with AMPEFI Transmission Control! The supplied 4L60E subharness provides a simple, plug and play integration with MS3Pro and directly mates with our LSx drop ...
View Details Add to cart -
MS3Pro 8ft Wiring Harness
$249.00MS3Pro 1st Gen Harness is discontinued and superseded by MS3Pro EVO. 8 foot (2.4 m) flying lead type harness for the MS3Pro. It has the MS3Pro's AMPSEAL connectors on one end and the other end is unterminated for installing your own connectors. This ha...
View Details Read more -
MS3Pro Logo T Shirt- Pink Ladies
$15.00'Official' MS3-Pro Pink Ladies Cut Logo T Shirt, available in various sizes! MS3-Pro: Advanced Power Management
View Details Select options -
IGN-1A Race Coil
From: $71.00The IGN-1A Race Coil is a smart coil designed to provide 103 mJ per spark, with a longer spark duration (2.9 ms), exactly what is necessary for high rpm, high compression, forced induction and/or nitrous engines! Each IGN-1A Race Coil features a buil...
View Details Add to cart
Top Rated Products
-
USB to Serial Adapter – Works with TunerStudio!
$22.50This USB to Serial Adapter has been tested and works properly with all versions of TunerStudio. We highly recommend this adapter is used if your tuning PC/laptop doesn't have a DB9 Serial connector. Or you can use another adapter with a genuine FTDI c...
View Details Add to cart -
Lead Bending Tool
$5.50Lead Bending Tool This inexpensive lead bending tool will come in very handy when building up your MegaSquirt kit or any electronics kit. It helps you to quickly bend the leads of 1/4 and 1/2 watt resistors, diodes, capacitors, inductors, etc to the ex...
View Details Add to cart -
Weather Pack 22 Position Bulkhead Connector Kit
$32.00Use this giant 22 Position Weather Pack connector to run wires through a firewall or as a quick disconnect for your engine harness, or other components that need a lot of wires. Includes: (1) 22 position male and female connector (13) 20-18 gauge m...
View Details Add to cart -
755 Piece Weather Pack Kit
$145.00Our Weather Pack kits contains everything you need to get your project done right! We've used other connector kits available on the market in projects around the shop and they never quite met our expectations. So in typical DIYAutoTune style, we stepp...
View Details Add to cart -
6 3/4″ 36-1 Trigger Wheel
$29.00Add a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 6 3/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts) and eight rad...
View Details Add to cart -
MicroSquirt Engine Management System with 30″ Wiring Harness
$360.00MicroSquirt Engine Management System with 30" Wiring Harness Version 3.0 The versatile MicroSquirt: Standalone Engine Management System, Transmission Controller or CAN I/O Expansion Module Microsquirt is our entry-level fully assembled ECU with var...
View Details Add to cart -
Ratcheting Crimper for Weather Pack Connectors, 14-20 Gauge
$108.00We've tracked down a source for a reliable, yet affordable, crimper for the Weather Pack connectors. This crimper is American made and truly creates a perfect crimp every time, without the price tag you'd usually pay for a Delphi 12014254 crimper. Th...
View Details Add to cart -
GM Closed Element CLT/IAT Sensor with Connector
$17.00These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and come with the weatherproof connector and crimp pins. Suitable for use as a coolant temperature or oil temperature sensor, and is occasionally used as an air temperature s...
View Details Add to cart -
MSPNP2 – 89-94 Nissan 240SX – Manual Trans
$799.00MSPNP2 Plug and Play Standalone Engine Management System 1989-1994 Nissan 240SX KA24E or KA24DE with manual transmission *Also fits the following USDM applications (all with manual trans): 1991-1994 Nissan Sentra / NX1600 / NX2000 with GA16DE or ...
View Details Add to cart -
MS3Pro Standalone ECU with 8′ Wiring Harness
$1,199.00IMPORTANT PRODUCT UPDATE** MS3Pro-Pkg1 has been discontinued and superseded by MS3Pro EVO effective May 1, 2017. This product page, including documentation, downloads & product FAQ tabs below, remains active for archive purposes. Compare MS...
View Details Read more -
MS3Pro Plug and Play – 93-98 Toyota Supra 2JZ – Manual Trans
$1,599.00MS3-Pro Plug and Play takes engine management to the next level! Easy to Use and Install! MS3-Pro Plug and Play Model #JZ9298 Features: Fully Plug and Play Installation - No wiring required for basic functionality. Average install time is ...
View Details Add to cart -
MS3Pro Plug and Play – 94-95 Mazda Miata – Manual Trans
$1,199.00MS3-Pro Plug and Play takes engine management to the next level! Easy to Use and Install! MS3-Pro Plug and Play Model #MM9495 Features: Fully Plug and Play Installation - No wiring required for basic functionality. Average install time is und...
View Details Add to cart