Cart

Quick Links

MaxSpark kit with components
MaxSpark kit with components
MaxSpark-Harness-Identifier-photov2
MaxSpark-hardware
HRN-IGN_SEQ_MM9005
SEQ-Conn-K
IMG_9123
MaxSpark-oncar-close
IMG_9111

MaxSpark PNP Ignition Kit for 1990-2005 Mazda Miata

$659.00

Product Quantity
MaxSpark kit with components

Mazda Miata MaxSpark - Model Year Select:

Clear
1
Add to wishlist
SKU: MAXSparkPNP-01 Category: Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Brand:

Description

We’ve put together the most powerful drop on, completely Plug-N-Play, ignition kit on the market for the Mazda Miata.

  • The kit utilizes the AMP EFI IGN1A ignition coils that put out over 100mj (nearly 2X more energy than the leading competitors) per spark event
  • Made of TXL high temp automotive grade wire
  • Color coded and printed wire with the corresponding spark output
  • Flame retardant looming
  • Labeled heat shrink for connector identification
  • Top of the line weatherproof automotive relay
  • Multi point grounding design
  • Pre painted coil mounting bracket
  • Direct Plug-N-Play for OEM wiring setups
  • Capable of aftermarket wiring connectivity
  • Allows for wasted, coil on plug, sequential, and many more firing capabilities
  • Step-by-step installation instructions
  • Wiring harness is designed to be tucked for a professional and appealing look when installed

Note: 1990 through early 1995 (and overseas 1994-1997 1.6) applications must use a standalone ECU. This is not compatible with the stock ECU for these model years as it does not provide an ignition confirmation signal.

Maxspark mm90-05 Installation Instructions

What’s in the box?

    • 1X Maxspark primary harness
    • 1X Maxspark secondary harness (model year specific)
    • 1X Sequential adapter harness
    • 4X AMP EFI IGN1A Ignition Coils
    • 1X Coil mounting bracket
    • 1X 50AMP fuse
    • 4X Bracket spacers
    • 4X Long bracket bolts
    • 8X Short Coil bolts
    • 12X Washers
    • 4X Spark plug wires

Can I run this with my factory ECU?

    • Yes, this kit was designed to be a direct plug and play for OEM setups. This is an important part of your purchase when making the “model year” selection because the OEM connectors differ for certain years.

Can I run this with an aftermarket ECU?

    • Yes, this kit was designed to be a direct plug and play for OEM setups or aftermarket setups with OEM wiring and ignition. If you have an aftermarket ECU and a custom wiring and ignition setup, additional modification is required. You will need to refer to the installation instructions to see how to wire custom spark outputs to the mating connector on the primary harness. For an additional charge, we offer a blank/un used plug and terminal kit to allot you to custom wire your own ignition setup to our harness

Where is this product manufactured?

    • The harnesses are all manufactured in Gainesville, Georgia, USA and bundled with other hardware sourced from right here in the USA.

What equipment will I need for installation?

    • The entire install can be completed with 10mm socket, 10mm wrench, 12mm socket, 12mm wrench, side cutters, electrical tape (if desired), and zip ties (if desired). These are the only tools needed for the install of the kit.
      • To remove your existing ignition setup, you may need additional tools other that the ones listed above.

Questions & Answers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.

Related products