Description
Need a weld-free way to add EGT fittings to a cast iron manifold? Drill and tap it for 1/8″ NPT pipe thread and bolt one of these in! Works with our Red Avenger and Black Stinger thermocouples.
$14.10
-
Out of stock
Need a weld-free way to add EGT fittings to a cast iron manifold? Drill and tap it for 1/8″ NPT pipe thread and bolt one of these in! Works with our Red Avenger and Black Stinger thermocouples.
You must be logged in to post a comment.
What diameter EGT probes does this work with?
What size drill should I use?
There are no questions yet, be the first to ask something for this product.
Hall effect crankshaft or camshaft position sensor. This is a new version, distinguished by its red anodized aluminum housing. Threads are M12 and mounting nuts included. Runs off 5 to 24 volts, and gives a nice square wave so there's no variable voltag...
Add to cartHall effect crankshaft or camshaft position sensor. We've tested this with our 6.75" and 8.25" trigger wheels. We were able to get a rock solid reading at over 19,200 RPM, which is as fast as our test rig could spin the trigger wheel. Runs off 5 to 24 vol...
Add to cartInnovate Motorsports HBX-1 Heatsink Bung Extender - #3729 The Bosch LSU4.2 wide-band O2 sensor (shipped as part of the LC-1 and LM-1 kits) is rated to operate at an exhaust gas temperature of < 1300 degrees (F), and a sensor housing temperature of &...
Add to cartAdd a crankshaft position sensor to your engine with our laser cut 36-1 crank trigger wheel. This trigger wheel is 6 3/4" in diameter and 1/8" thick, with a 1/2" diameter center hole (with plenty of room to enlarge it for larger crank bolts). The teeth ar...
Add to cartConvert your Nissan CAS to a more MegaSquirt-friendly arrangement with our bolt-in 50mm Nissan Trigger wheel! This replaces the stock low-resolution Nissan trigger wheel that has four slits with a higher resolution 24-2 wheel crank trigger. Intended for u...
Add to cartGM Open Element IAT Sensor with Pigtail Recommended 'Fast-Response' Intake Air Temp Sensor (IAT) for use on forced induction vehicles. These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and include a 6" wire pig-tail with we...
Add to cart
Reviews
There are no reviews yet.