Cart

Quick Links

MSPNP2 EEC4 Mustang ECU
MSPNP2 EEC4 Mustang ECU
MSPNP2 EEC4 Mustang Rear ISO
MSPNP2 EEC4 Mustang Rear Options
MSPNP2 EEC4 Mustang Front
MegaSquirtPNP G2 EEC4A8 for 86-93 Ford Mustang 5.0

Ford Mustang 5.0 1986-1993 MSPNP Gen2 Plug and Play ECU

5 out of 5 based on 1 customer rating
(1 customer review)

From: $869.99

Product Quantity

USB to Serial Adapter - Trouble Free!!

1
SKU: MSPNP2-EEC4A8 Category: Tags: , , , , , , , , , , , , , , , , , , , , , , Brand:

Description

MSPNP2 v2.0 Plug and Play Standalone Engine Management System

1986-1993 Ford Mustang 5.0 & 1986-1988 Ford Thunderbird 5.0 with manual or factory automatic transmissions!
Easy to Use and Install!  (Can be reconfigured for some other EEC-IV equipped cars with internal jumper changes by special order – contact us for details)  

MSPNP2 v2.0 Model #EEC4A8 Features:

  • Fully Plug and Play Installation – No wiring required for basic functionality.  Average install time is under 1 hour!
  • 5.0 HO base maps is pre-loaded to help your engine start on the first turn of the key
  • Real time tuning and data logging with a laptop connection
  • Supports most aftermarket wideband sensors
  • Uses internal MAP sensor – can be used on both cars with factory MAF or speed density
  • Mounts in the stock location – case is specifically designed to use factory mounting points

Fully Tunable Engine Control!     

  • 16×16 Fuel Tables allow high resolution tuning
  • Bank to bank fuel control
  • 12×12 Ignition Tables
  • Multiple Acceleration enrichment strategies
  • Closed Loop Idle Speed Control
  • Retains air conditioner function
  • Onboard injector drivers support high impedance injectors
  • Allows removal of stock MAF sensor, if so equipped

Advanced Feature Set (Included!)

  • 12×12 Air Fuel Ratio Target Tables for use with wide band O2 sensor for precise tuning and table trim.
  • Built-in 2-step rev limiter / launch control with flat shift
  • Real time barometric correction
  • Internal 4-bar MAP sensor reads up to 44PSI of boost
  • Overboost protection
  • Closed loop boost control (Requires DIYAutoTune.com EBC solenoid kit)
  • Table switching input. Change fuel and spark maps on the fly for different fuels, nitrous activation, etc.
  • Input for flex fuel sensor – switch between E85 and gasoline on the fly!
  • CANBus connector allows interconnection of other MegaSquirt-compatible devices for additional functions (EGT Input, Automatic Transmission Controller, Additional Sensors)…..the possibilities are limitless!

What you get in the box:

  • MSPNP2 v2.0 Standalone Plug and Play EEC4A8 ECU
  • MSPNP RS232 serial tuning cable, 6′ (USB adapter sold separately, if needed)
  • Tuning Software and Documentation USB Stick with TunerStudio Lite
  • 6′ Vacuum Hose for MAP Signal and ‘T’ fitting

Note: We’re looking for a 2.3 Turbo car as a test mule for a variant of this ECU. If you’ve got an SVO Mustang, Merkur XR4Ti, or Thunderbird Turbo Coupe that we can use for R&D, please email [email protected] about your car. We’re in the Atlanta area and would need the test car for a few weeks.

Note: Although there is a paid upgrade to TunerStudio, it is not needed to tune this ECU. The free version included on the USB Stick can access all the features and tables of the MegaSquirtPNP. The paid version of TunerStudio simply adds tuning and analysis software, such as VE Analyzer Live to tune the fuel tables based on wideband O2 feedback (requiring a wideband O2 sensor and controller, sold separately).

Customer reviews

Rated 5 out of 5 stars
1 review
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

1 reviews with rating of 5 stars (1 of 1)

(Show unfiltered results)

1 review for Ford Mustang 5.0 1986-1993 MSPNP Gen2 Plug and Play ECU

Add a review

Is this all that I need to get started tuning my Mustang?

  • The only other potential must-have is that if your laptop doesn’t have a 9 pin serial port, you will need our USB to serial adapter to connect to this unit. However, there are several other things you may wish to add to use this unit to its full potential.

Does the MSPNP Gen 2 support sequential injection on Fox body Mustangs?

  • The MSPNP Gen 2 has a maximum of four fuel channels, so it is configured for bank to bank fueling in this application.

What if I have an automatic transmission?

  • The transmission in Fox body Mustangs operates independently from the ECU, so you can use this one with a manual or automatic transmission.

Where’s the serial port on this one?

  • The 9 pin serial port on the other MSPNPs did not clear the stock mounting bracket on this car, so we have opted to use a 2.5 mm barrel connector for the serial cable for this model.

Questions & Answers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.