Cart

Quick Links

microsqrt8(2)
microsqrt8(2)
microsquirt(2)
microsquirt(3)

MicroSquirt Engine Management System with 8′ Wiring Harness

5 out of 5 based on 1 customer rating
(1 customer review)

$388.00

-

Description

Please note — due to parts shortages, Microsquirt 8′ harnesses are unable to ship until beginning of May 2021.  We are very sorry for the delay!

MicroSquirt Engine Management System with 8′ Wiring Harness

Version 3.0

The versatile MicroSquirt: Standalone Engine Management System, Transmission Controller or CAN I/O Expansion Module

Microsquirt is our entry-level fully assembled ECU with varied applications targeting power sport single cylinder all the way up to 8 cylinders with up to 2 fuel and 4 spark outputs.  Over 40 different ignition modes are supported from mainstream applications like GM LS1, Ford Zetec, Bosch Motronic, and Chrysler Gen III Hemis to unusual modes like Renix Jeep and the Suzuki Swift GTI.

MicroSquirt Engine Management Software Features

-Supports speed density, alpha-N (TPS based), or MAF based fuel and spark tables
-0.66 microsecond injector pulse width resolution
-Allows blending multiple load types, including specialized mode for independent throttle bodies
-Supports a wide variety of OEM cam and crank position sensors
-Accelerator pump or model based acceleration enrichment
-Closed or open loop idle speed and boost control -On/off nitrous control
-Wankel rotary support: 2 rotor engines with separate leading and trailing spark tables
-Staged injection
-Table switching
-16 x 16 fuel and spark tables
-2 step rev limiter (launch control) with no-lift shifting
-Wideband AFR target table
-Flex fuel sensor input
-Real time barometric correction (external sensor required)
-Sequential shift cut and air shifter control

MicroSquirt Transmission Control

MicroSquirt transmission control free firmware allows you to use microsquirt to control a number of electronic automatic transmissions (gearboxes). It can work standalone or integrate with one of our ECU’s over canbus.

Control applications:  GM 4L60E  I  GM 4L80E  I  GM 4T40E  I  GM 5L40E (dev)   A341E  I  41TE (dev)  I  Ford 4R70W  I  Ford E40D (dev)  I  Subaru W4A33

MicroSquirt CAN I/O Box Expansion

Microsquirt I/O Box firmware allows you to use a Microsquirt as a plug’n’play I/O extension box for the MS3 or MS3-Pro ECUs.  It can offer a useful I/O addition:

-7 Analog inputs (0-5V variable)
-2 Wheel speed inputs (VR or hall type)
-2 Wheel speed (hall type) or ground-switch inputs
-1 dedicated ground-switch input
-2 high current PWM/switch ground-switching outputs
-4 mid current PWM/switch ground-switching outputs
-1 low current PWM/switch 0-12V output
-Perfect for capturing and logging vehicle speed and additional sensor data (e.g. pre- and post- intercooler temperatures, fuel pressure, oil temperature etc.)

To Use a GM 1, 2, or 3 Bar MAP Sensor with the MicroSquirt

In the illustration:

A is ground,
B is the sensor output signal to MicroSquirt,
C takes 5 Volts from MicroSquirt.

The pins are marked A-B-C on the sensor itself.

Customer reviews

Rated 5 out of 5 stars
1 review
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

1 reviews with rating of 5 stars (1 of 1)

(Show unfiltered results)

1 review for MicroSquirt Engine Management System with 8′ Wiring Harness

Add a review

Is this just for motorcycles and other small engines, or can it be used in a car or truck?

  • The MicroSquirt can run regular automotive engines; it’s not just for powersports applications. It is possible to run this on a V8 in wasted spark, although it doesn’t have very much I/O to spare for extra functions when using four spark outputs.

I’ve heard some people say it has two spark outputs and some say four. What’s the deal?

  • It was originally designed for two spark outputs, but the MS2/Extra code allows you to use WLED and ALED outputs as additional spark outputs. You will need to add resistors in the wiring harness for using them with most coils.

Is it waterproof?

  • No, but you can make it waterproof with a bit of RTV silicone around the edge of the case.

Are there other versions of the MicroSquirt for other functions? Transmission control or the “IO Box”, for example?

  • These all use the same ECU, just running different code to change its function and use it as a transmission control unit or I/O expansion device. See MSExtra.com for details.

Could I use two MicroSquirts, one running the engine and one running the transmission?

  • Yes. They would link up over their CAN networks to look like a single unit to the tuning software.

Where is this unit made?

  • They are built in the USA – electronics, harness, and case.

What do I need to tune this unit over USB?

Questions & Answers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.