Cart

Quick Links

mm Corner Shot 1 Trans size revision
mm Corner Shot 1 Trans size revision
mm Corner Shot 2 Trans
mm Back Shot 1 Trans

Mazda Miata 1994-1995 MSPNP Gen2 Plug and Play ECU

From: $829.99

Product Quantity

USB to Serial Adapter - Trouble Free!!

1
SKU: MSPNP2-MM9495 Category: Tags: , , , , , , , , , , , , Brand:

Description

MSPNP2 Plug and Play Standalone Engine Management System

1994-1995 USDM Mazda Miata w/ manual transmission
*Does not fit 1994-1995 European / Japanese market 1.6 cars. These use the MM9093 model instead.

Second Generation MSPNP; Easy to Use and Install!    

MSPNP2 Model #MM9495 Features:

  • Fully Plug and Play Installation – No wiring required for basic functionality.  Average install time is under 1 hour!
  • Base map is pre-loaded to help your engine start on the first turn of the key
  • Real time tuning and data logging with a laptop connection
  • Supports most aftermarket wideband sensors

Fully Tunable Engine Control!

  • 16×16 Fuel Tables allow high resolution tuning
  • 12×12 Ignition Tables
  • Multiple Acceleration enrichment strategies
  • Closed Loop Idle Speed Control
  • Air Conditioner Control
  • 4 sequential fuel injector channels with individual trim tables
  • Onboard peak and hold drivers support both high and low impedance injectors – No external ballast resistor is needed!
  • Allows removal of stock airflow meter

Advanced Feature Set (Included!)

  • 12×12 Air Fuel Ratio Target Tables for use with wide band O2 sensor for precise tuning and table trim.
  • Built-in 2-step rev limiter / launch control with flat shift
  • Real time barometric correction
  • Internal 4-bar MAP sensor reads up to 44PSI of boost
  • Overboost protection
  • Closed loop boost control (Requires DIYAutoTune.com EBC solenoid kit)
  • Knock sensor input with adjustable sensitivity
  • Headphone output for knock sensor – listen for knock while you tune!
  • Table switching input. Change fuel and spark maps on the fly for different fuels, nitrous activation, etc.
  • Input for flex fuel sensor – switch between E85 and gasoline on the fly!
  • CANBus connector allows interconnection of other MegaSquirt-compatible devices for additional functions (EGT Input, Automatic Transmission Controller, Additional Sensors…..the possibilities are limitless!

What you get in the box:

  • MSPNP2 Standalone Plug and Play MM9495 ECU
  • MSPNP RS232 serial tuning cable, 6′ (USB adapter sold separately, if needed)
  • Tuning Software and Documentation USB Stick
  • 6′ Vacuum Hose for MAP Signal and ‘T’ fitting
  • Four Screws for ECU mounting

Note: Although there is a paid upgrade to TunerStudio, it is not needed to tune this ECU. The free version included on the USB Stick can access all the features and tables of the MegaSquirtPNP. The paid version of TunerStudio simply adds tuning and analysis software, such as VE Analyzer Live to tune the fuel tables based on wideband O2 feedback (requiring a wideband O2 sensor and controller, sold separately).

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “Mazda Miata 1994-1995 MSPNP Gen2 Plug and Play ECU”

Where is this product assembled?

  • This product is assembled in Suwanee, Georgia, USA

I have swapped a different year engine, will this still work?

  • You must use the MSPNP that matches the year of the engine harness you are using.

Is this all that I need to get started tuning my Miata?

  • The only other potential must-have is that if your laptop doesn’t have a 9 pin serial port, you will need our USB to serial adapter to connect to this unit. However, there are several other things you may wish to add to use this unit to its full potential.

Will this control VVT if I swap in a later VVT Miata engine?

  • This unit does not support VVT. We recommend starting with an MSPNP Pro if you have or are planning a VVT swap. If you already have this ECU, you could add our VVTuner piggyback device.

What is the difference between the MSPNP Gen 2 and the MSPNP Pro?

  • The MSPNP Gen 2 will provide fuel and ignition control, plus some basic race features such as launch control and boost control. The MSPNP Pro adds a number of advanced features, such as:
    • Programmable alternator voltage control that you can adjust through TunerStudio
    • VVT control for ’01-’05 engine swaps
    • Sequential spark control for coil per plug conversions
    • Eight fuel channels to allow for a fifth injector control or staged sequential injection
    • Boost by gear or ground speed
    • Timed boost delay and spark retard activated by launch control
    • Traction control
    • Rally style anti-lag
    • Advanced flex fuel support that allows blending almost all fuel and ignition tables based on fuel composition
    • Progressive nitrous control
    • Variable water injection control

Questions & Answers

There are no questions yet, be the first to ask something for this product.

Send me a notification for each new answer.