Showing 17–29 of 29 results
-
4 Pin M12 Serial Cable
$29.99Optional, connect MS3Pro ULTIMATE directly to your laptop with this 4 pin M12 serial cable.
Read more -
MS3Pro 1st Gen Wiring Harness Upgrade (for ULTIMATE & EVO)
$23.99If you have a previously installed MS3Pro harness (1st Gen) and want to change to an MS3Pro ULTIMATE or EVO ECU, the upgrade path is simple. However, complete functionality will require a few basic changes to your 1st Gen harness. Our wiring upgrade ki...
Add to cart -
MS3Pro EVO Uncrimped AMPSEAL Connectors
$64.99Making your own harness? This plug and pin kit features the MS3-Pro AMPSEAL connectors plus 75 pins (so you'll have a couple extras) for making your own MS3-Pro EVO harness. (or Gen1 if you wish) Download AMPSEAL Assembly Instructions
Add to cart -
USB to Serial Adapter – Trouble Free!!
$28.99This FTDI chipset USB to Serial Adapter has been tested and works properly with all of our ECU products and all versions of TunerStudio on a wide range of operating systems. This is probably the most common item we see people come back for after a purch...
Add to cart -
MicroSquirt Engine Management System with 8′ Wiring Harness
$388.00Please note -- due to parts shortages, Microsquirt 8' harnesses are unable to ship until beginning of May 2021. We are very sorry for the delay! MicroSquirt Engine Management System with 8' Wiring Harness Version 3.0 The versatile MicroSquirt: Stan...
Add to cart -
MicroSquirt Engine Management System with 30″ Wiring Harness
$360.00MicroSquirt Engine Management System with 30" Wiring Harness Version 3.0 The versatile MicroSquirt: Standalone Engine Management System, Transmission Controller or CAN I/O Expansion Module Microsquirt is our entry-level fully assembled ECU with var...
Add to cart -
MicroSquirt Engine Management System – ECU only
$335.00MicroSquirt Engine Management System Version 3.0 ECU Only - no harness The versatile MicroSquirt Engine Management System, Transmission Controller or CAN I/O Expansion Module is our entry-level fully assembled ECU with varied applications targ...
Add to cart -
Electronic Boost Control (EBC) Solenoid Kit
$62.99This electronic boost control solenoid can be used with the MS3-Pro/MSPNP2 or with other electronic boost controllers to control boost by adjusting the pressure to a turbo wastegate. The MS3-Pro, MS3-Pro Plug and Play, & MSPNP2 can drive this direct...
Add to cart -
Gen 1 MS3Pro F1/F2 + EVO F4 Replacement Fuse
$2.25The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. These 500mA fus...
Add to cart -
MS3Pro Module F1/F2 Replacement Fuse
$3.00The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 100...
Add to cart -
MS3Pro Ultimate + EVO F5 Replacement Fuse
$3.00The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. These 500mA fus...
Add to cart -
MS3Pro Ultimate F4/F6 Replacement Fuse
$2.00The MS3Pro ECU’s feature user-replaceable fuses that protect against voltage spikes and other abuse. To replace these fuses, use a needle nose pliers to pull the fuse out of its holder, and then push in the replacement fuse by hand. This is the 375...
Add to cart -
HSD-4 High Side Driver with 4 channels
$109.99Have an application with a lot of small solenoids that need 12V power and rapid switching? Don't want the expense of a bank of four separate solid state relays, each rated for five times the current each solenoid needs? This module lets you run up to four...
Add to cart